Installing a Tub Surround

If your tub/shower enclosure has seen better days, why not give it an update? One of the easiest, cost-effective ways to replace your dingy enclosure is to purchase and install a shower/tub surround kit.

Why panels?

These handy kits generally come with three or five pieces. If your enclosure is perfectly square, a three-piece kit (with a back panel and two side panels) is the way to go. But if you're dealing with crooked walls or walls that aren't plumb, the five-piece kit (with a back panel, two corner panels, and two end panels) offers more flexibility.

Not only are these panels water-resistant, they're also easy to clean and will almost instantly revive your bathroom-what's not to love about that? And they come in a variety of materials, from solid surfacing to pressed fiberglass. Though thicker panels are usually more expensive, they're more stable and easier to work with.

Prep work.

Before getting to work, protect the bottom of your tub from dings and scratches with a heavy cloth. If your current shower interior is solid, flat, and in good structural condition, you can install the panels over the existing material (just be sure to give it a good cleaning first, and scuff tile with sandpaper so it'll better grip the adhesive). For drywall, cut out damp sections and replace it with a moisture-resistant version. If you've got a tile surround, simply stick loose tiles back in place with ceramic-tile adhesive. But if several tiles are loose, just remove them altogether and replace them with moisture-resistant drywall.

Now comes the tricky part: removing the showerhead, faucet, and spout-as well as other accessories such as wall-mounted shelves or soap dishes.

Using a tall piece of cardboard, make a template of the side of the tub with the bath fixtures. Measure the exact locations of the faucet handles, showerhead, and tub spout. Cut holes in the cardboard, hold the cardboard up to the wall to make sure the holes align with the fixture placements, and mark the locations on the surround panels.

Installation.

Measure your walls and trim your panels accordingly. Following manufacturer's instructions, apply the adhesive, then attach the panels to the walls and let them dry thoroughly. Replace the hardware, and seal joints with caulk.

For more detailed instructions, check out Popular Mechanics and This Old House. Or watch this step-by-step video, courtesy of HGTV.

Lexicon Consulting, Inc

The Home Know-It-All: Your One-Stop Shop for Home Design, Improvement, and Repair

Stepping On Ceiling Plaster
Behind Wood Lath Plater