When I helped by buddy redo his basement, he wasn't sure what the best type of ceiling to use would be. Some of the choices available were traditional drywall, tongue and groove boards, acoustic ceiling tiles, and a drop-type ceiling. We didn't know which to choose, so we looked at each type a little closer.
A drywall ceiling would be a lot of work. Almost all of the pipes and ductwork would have to be rerouted to fit into joint cavities or out to the edges of the room. If there were still things hanging below the bottom of the ceiling joists, we'd have to build boxes around them. Wherever we needed extra strength, we'd have to nail up furring strips.
In using a drywall ceiling it's important to use the furring and framed boxes to make a strong backing to hold the finishing materials. Although drywall was a low-cost option, we knew there was still a lot of work after the sheet rock was hung, and we weren't real excited about it.
Acoustic ceiling tiles are another great option. They are small enough to be easy to handle and cut. Ceiling tiles are installed by stapling them onto furring strips. In order to do that, once again, we'd need to move everything in order to have a flat surface to staple them to.
The next option we considered was T1-11 tongue and groove boards. This project would once again entail moving pipes and ducts, and it was also the most expensive option we looked at. My friend decided that this just wasn't the look he wanted for his ceiling, so we moved on.
Last on our list was a standard drop ceiling. This is one of the easiest ways to cover ceiling joists, but you still have to cut and hang rails for the ceiling framework, and my friend didn't like the fact that this type of ceiling looked like it belonged in an old office building, not his newly-decorated basement. Besides, drop ceilings were one of the more expensive options we'd looked at.
We'd worked our way completely through our list, and we still hadn't come up with a solution. Then, while shopping one day, he noticed the ceiling of the store he were in. It looked just like his basement ceiling, but a whole lot better. He had to ask the owner what they had done to achieve the look. The owner said all they'd done is clean the pipes and ductwork thoroughly, gave them a coat of primer, and used a sprayer to paint the whole works the same color. It looked amazing, and my friend knew he had found his ceiling.
Once we got started our one concern was whether or not we could paint electrical and gas lines. We solved the problem by calling a professional electrician to ask for his opinion. You know, this ceiling was easier to do than any of the other options, and it cost far less, but it looked super. Before trying this option in your own home, make sure to call a professional electrician like we did, just to make sure it's safe. So I guess the moral of the story is, if you don't like standard ways of doing things, start thinking outside the box.
Before you start your basement projects, learn more about waterproofing basement products and basement sealing paints.
No comments:
Post a Comment