Wednesday, September 30, 2009

How to Protect Foundation Plumbing Pipes?

If you install any underground plumbing pipes, in your concrete building foundation, you will need to protect them, from the concrete. You can use a variety of products and the most common of them will be a Styrofoam wrapping that can be purchased at most plumbing supply stores.

Let's start with the waste pipes, that are made out of plastic. The concrete could actually start to put pressure on the plastic pipes as the concrete starts to expand and this pressure could actually damage your new waste pipes.

You don't need to wrap all of the plastic waste pipes, only the parts of the waste pipes that will be exposed or in direct contact any concrete, but you do need to protect every copper water supply line that will be buried under the ground or exposed to the concrete, with a plastic sleeve. These products can be purchased again at most building supply or plumbing supply stores.

If these pipes aren't protected properly, you could find yourself within a short time, repairing the pipes that are either inside of your concrete foundation or buried underneath your concrete foundation. Either way, this isn't going to be a good thing.

You definitely need to wrap a plastic sleeve around the water supply pipes that are going to be buried or in direct contact with the concrete. This is a must and most building departments will require your plumbing pipes to be wrapped, before it they will sign off on your rough foundation plumbing inspection.

However, for the waste pipes, you can actually use cardboard to protect them. If you're short on funds, why not grab some cardboard boxes, dismantle them and start using cardboard to wrap the pipes, with a little duct tape.

There are plenty of ways to save money in the construction business, buy a few books, read a couple of articles, with a lot of pictures in this can provide you with lots of construction information, from experience building contractors.

Check out some of the best selling Home Building Plumbing Books all on one website

If you're really interested in basement remodeling and repairs, you should click on this link Home Repairs. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks for reading our articles

Tuesday, September 29, 2009

10 Things a Homeowner Won't Tell a Contractor - Common Courtesy

I've been a contractor in the state of California for over 20 years and there are some things that a homeowner won't tell a contractor. These are a few things that a contractor might want to hear, but a reluctant homeowner, might have second thoughts telling their contractors how they really feel.

1. We are happy with all of the work that you did in a timely manner and we appreciate your services.

2. We are happy with the way you performed your construction tasks, efficiently and we appreciate your services.

3. The work was done by a true professional and we would recommend you to any one of our friends.

4. The payment plan that you created in the contract worked out perfectly and never made us feel uncomfortable. It never seemed like you had too much of our money or we were putting you in a bad spot financially.

5. Thanks for keeping the job clean, it meant a lot to us, because we have seen other construction jobs that look like a tornado ran through them.

6. Thanks for helping us with our design. Working with your contractor on a daily, weekly or monthly basis can be frustrating or joyful. Let the contractor know either way how you are really feeling.

7. You and your crew are extremely hard-working and we appreciate the simple fact that you didn't come to work late or leave early.

8. Thanks for the reasonable priced estimate on our project. You helped us say a lot of money and we appreciate that sincerely.

9. Thanks for doing the extra work at a reasonable price. You could have gouged us at certain times, but you chose to be fair and work things out, in a way that would benefit both of us.

10. This one is the most important and often overlooked by homeowners and it's simple and easy to do. Thanks for doing what you said you were going to do and actually doing it.

Just a simple thank you and paying them on time, for a service well done is enough for most contractors. However, a little common courtesy can go a long way, even in the construction industry.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link Home Remodeling Contractor

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Click here if you're looking for additional Homeowner Contractor Advice. If you're interested in gathering more information on how to hire a good contractor, make sure that you visit our website.

Important Do-It-Yourself Home Remodeling Advice

Often I'm asked by homeowners, if they think that they can build something on their own. Often I end up explaining the process to them and it's pretty confusing. I would like to give some homeowners and construction handyman some do-it-yourself home remodeling advice, about projects that I think they should avoid and the reason why.

1. Working on Electrical Service Boxes

I really don't recommend, anyone who lacks experience working with electrical, to be working on it at all. When it comes to the electrical service box repairs, if you don't have any experience working in this specific area, I am suggesting this to all homeowners and do-it-yourselfers, stay away from electrical service power boxes. Electricity can be extremely hazardous to your health, so take my advice, this is coming from an expert on the subject.

2. Plumbing Water Supply Lines

I don't recommend, anyone who doesn't have any experience working with plumbing water supply lines, because if they break, or if your repair, doesn't hold properly, you could destroy a large portion of your home. Picture this, you just got through putting a new faucet in, everything looks great, but it's time for you to go to your baseball game. You come home about four hours later and the entire house is flooded with water.

This kind of stuff does happen and you need to take the advice of an expert here. It has even happened to me and I understand the process, pretty good. If you plan on fixing any plumbing water supply lines, make sure that you can spend the time, keeping an eye on your new home repair. If you're going to have any problems with them, they will usually happen within the first few hours of use.

I hope this helps, sometimes it's better to pay a professional, but I can understand, every intelligent person, is interested in saving a few dollars and learning new skills.

If you're really interested in basement remodeling and repairs, you should click on this link Home Repair Pictures and Advice. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link Vista Home Repair Contractors

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

Home Purchasing Checklists Provide Protection

Home purchasing checklists provide protection for consumers with useful information for future home repairs or current home repairs that will need to be done before the home is sold. Home inspectors often use checklists like these, while they're inspecting the home.

If more home shoppers used home inspection checklist while shopping for houses, we would probably have more satisfied homebuyers than dissatisfied ones. Recently just purchasing a home, we had our real estate professional, the previous homeowner's real estate professional and a mortgage lender, involved in the purchase of the property.

There was a home inspection report from the current homeowners, available for us to look at. It provided us with the damaged parts of the home that were repaired or replaced. Some of these repairs were from termite damage and it was stated so on the report. This was helpful information for us as we walked around the home inspecting it for damage.

The work that was repaired to look satisfactory and the rest of the home had minor damage. Listening to one of the real estate sales people that were involved in the transaction, you would've thought we would get in the deal of a lifetime and they had nothing but good news to say about the product they were representing. I easily understood that, this person could have influenced some one into believing that the home was in great shape, if they didn't have a home inspection checklist with them.

The home had been re-carpeted, painted and was in generally good shape. The problems with the home, were the old windows that were hard to open, the heating unit leaked gas, the tile flooring that ran through the kitchen and a large room addition looked great, except for one thing, they installed the tile over linoleum.

This eventually will have to be replaced as the tile starts to separate from the linoleum. While I'm writing this article, there's about 40 square feet of tile that needs to be replaced, because it's popping up and cracking.

A home purchasing checklist does not guarantee that you will find everything but can't eliminate some of the things that homeowners have the biggest problems with. If you could just eliminate one of these problems, the small price of purchasing, one of these checklists would be worth it.

Home purchasing checklists provide protection for the shopper and I would recommend, never shopping for a home without one.

If your looking for some more home inspection or home building ideas.

By Greg Vandenberge

What is a Three Way Home Electrical Light Switch?

A three way home electrical light switch is a special light switch that can be used in your hallways, large rooms and stairways. These light switches are specially made to operate one light or a group of lights from two different locations.

They are most commonly found in hallways and provide a homeowner with the option of turning the light on at one end of the hallway and turning it off, when they are finished walking through the hallway and are about to enter into another room.

Before three way home electrical light switches were made, people would turn the hallway light on and leave it on or they wouldn't turn the hall light on at all, because they knew that after they walked down the dark hallway, they wouldn't be able to turn the light off at the other end.

Three-way light switches are also used in stairways. It makes a lot of sense, to be able to turn your stairway light on, at the bottom of the stairs and then after you have walked up the stairway safely, you can simply turn the stair lights system off.

As homes become larger, it's not going to be uncommon to find three way light switches being used at either end of large rooms. If your living room or family room was located within the center of your home and had an entrance at each end, it wouldn't be a bad idea to install a light switch at each end, for travelers who are simply walking through these room.

Remember that three-way light switches, are used to operate lights from two different locations.

If you're really interested in basement remodeling and repairs, you should click on this link Great Home Repair Advice. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link Encinitas Home Remodeling Contractors

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

Monday, September 28, 2009

Building Codes - Stairway Construction

The stair building code was created for building safety. Before the building code and local city enforcement (Building Inspectors), anyone could build a house. This meant Uncle Earl who had just watched a couple of his friends build a house down the street construct some sort of a dwelling. The next step for Earl would be to help these guys for a day and now he is a professional home builder. You get the point.

Stair Building Codes create the safety needed for one of the most hazardous areas of your home. You might know someone who has fallen down a stairway?

I lived in a house I built for 15 years and I redesigned the stairs from a winder design to a T shaped set of stairs. Both sets of stairs were built using the local stair building code for my city.

Wow I could not believe how many times my family members fell down the stairs. I even fell down once. I was amazed. When I switched from the winder to the T shaped stairway there were less accidents. My point is that even using the stair building codes this is a dangerous part of your house.

Having a professional stair builder install your stairs is great advice. Take it. For example this happened to me on quite a few jobs. I get a set of plans from a architect who has been designing houses for over 40 years. I looked at the stairway to find out that he has designed a stairway that is too small for the length of this part of the home. If I build the stairs using the plans that by the way were approved from the local building department, I could have a problem.

You are probably asking yourself how does this happen. Aren't these people experienced professionals. Of course they are. They probably have the U.B.C. (Uniform Building Code) in their office somewhere. Everyone makes mistakes here and there but this is one area of the home where safety is a big concern.

Just look at it like this. The stair building code was designed to improve the safety and reduce the number of accidents while using the stairs. Over the years I have seen stairs poorly designed and constructed. These stairs create problems for the owners of the buildings not just the people that use them. Did I mention lawsuits. This is one area where a lawyer will have a field day.

As a building professional I advise you to use the stair building code first for safety and second to avoid lawsuits. Get an idea from some of the pictures I have taken over the years on problems with stair building.

Use common sense while building or remodeling your home. It goes a long way.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry. Stair Building Articles

Retaining Walls Suffer From Moisture Problems

Whether you're driving down the road or through a neighborhood and you notice a retaining wall that has large cracks in it, or is severely discolored, or one that has white calcium deposits from moisture covering the entire wall, you've got problems with moisture.

The retaining wall is designed to hold the dirt back, that's it's sole purpose. It's not going to hold any moisture back unless someone has installed a waterproofing membrane to separate the soil from the concrete block wall. If the soil isn't ever going to get wet, then you probably don't need to waterproof the retaining wall.

However that's normally not going to be the case. So we need to waterproof the interior of our retaining walls to eliminate future moisture problems that could eventually, deteriorate as moisture starts to accumulate, inside of our block wall for a longer periods of time.

If you don't know anything about waterproofing, I would suggest that you hire a waterproofing expert. Waterproofing looks easier than it actually is, and might be out of your scope of work.

I'm not going to suggest that you use waterproofing paints, because I haven't seen great results with these products. However, if you're not that concerned about your retaining wall and are looking for a cheaper way to apply any waterproofing materials, these paints might not be a bad idea. Sometimes, Something is better than nothing.

If you live in a relatively dry climate, it might not be necessary to waterproof your retaining walls. But if you live in a damp or moist area, especially an area where the ground is moist all year round or more than six months out of the year, I would suggest that you waterproof the back of your retaining walls.

If you're really interested in basement remodeling and repairs, you should click on this link House Basement Repair Ideas. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Dryer Vent In Basement Window.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

Friday, September 18, 2009

Tile Grouting Tips For Your Bathrooms, Kitchens and Floors

Isn't tile grouting supposed to be simple, if you read the directions and watch a couple of videos? What could make tile grouting so difficult? Grouting your tile isn't that difficult, by the time you're done reading this article, you should have a pretty good idea how to grout your floors, bathrooms, kitchens and anything else that requires tile.

I used to have problems grouting tile, but after I read the directions, I became a grouting wizard. This sounds hard to believe, but after reading the directions on the tile grout bag, I became a grout master. I know, you the type of person who never read the directions, you simply add water, mix and start grouting.

It's time to change your thinking about, whether or not the directions will be helpful. Whether it's about grouting your bathroom floor or putting together your home barbecued. I read one thing on the grout bag and it changed my entire grouting career.

The grout should slake. After you're done mixing the grout, you should wait between five and 10 minutes to let the moisture soak into the grout mix. Do this once, and you will never go back to mixing your grout and applying it, as quickly as possible after it has been mixed.

For more information on grouting, remodeling or home repairs, I would recommend reading books on home improvement and home repairs. Some of these books can make a big difference in your home improvement abilities as a handyman. I would also recommend reading more articles, there's plenty of information about tile and grouting, all over the Internet.

Click here if you are looking for some more Bathroom Remodeling Ideas

If you're really interested in basement remodeling and repairs, you should click on this link Home Repair Tips. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks for reading the article

Important Do-It-Yourself Home Remodeling Advice

Often I'm asked by homeowners, if they think that they can build something on their own. Often I end up explaining the process to them and it's pretty confusing. I would like to give some homeowners and construction handyman some do-it-yourself home remodeling advice, about projects that I think they should avoid and the reason why.

1. Working on Electrical Service Boxes

I really don't recommend, anyone who lacks experience working with electrical, to be working on it at all. When it comes to the electrical service box repairs, if you don't have any experience working in this specific area, I am suggesting this to all homeowners and do-it-yourselfers, stay away from electrical service power boxes. Electricity can be extremely hazardous to your health, so take my advice, this is coming from an expert on the subject.

2. Plumbing Water Supply Lines

I don't recommend, anyone who doesn't have any experience working with plumbing water supply lines, because if they break, or if your repair, doesn't hold properly, you could destroy a large portion of your home. Picture this, you just got through putting a new faucet in, everything looks great, but it's time for you to go to your baseball game. You come home about four hours later and the entire house is flooded with water.

This kind of stuff does happen and you need to take the advice of an expert here. It has even happened to me and I understand the process, pretty good. If you plan on fixing any plumbing water supply lines, make sure that you can spend the time, keeping an eye on your new home repair. If you're going to have any problems with them, they will usually happen within the first few hours of use.

I hope this helps, sometimes it's better to pay a professional, but I can understand, every intelligent person, is interested in saving a few dollars and learning new skills.

If you're really interested in basement remodeling and repairs, you should click on this link Home Repair Pictures and Advice. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link Vista Home Repair Contractors

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

Five Things That a Termite Inspection Company Might Not Ever Say

I don't think that I've ever heard of a termite inspector, ever go to a home and not find any termites. Even if the home doesn't have any damage that is visible from the termites, it seems like it's always a good idea, to tent the home, just in case, for protection. Anyway, here's five things that you might not ever hear a termite inspector ever say.

1. Your house is free of termites. This means that there isn't, one termite on your property and the termite inspector isn't going to make any money. Let's face it, termite damage, whether it's visible or invisible, keeps these guys working.

2. Your house isn't going to fall down, if I don't do anything to stop the termites. I have seen homes, where termites have been working on them for quite some time and they still seem to stand up and function properly.

3. Termites don't eat much and I wouldn't worry about the damage. Most termite inspectors will tell you how much a termite in Hawaii or Africa will eat in a day, but doesn't seem to have an honest idea, how much damage they are doing to your home, if they can't actually see it.

4. Every one that works for our company, has at least 30 years experience, repairing any termite damage. Don't even get me started with this one.

5. We will replace all of the termite damage wood, back to its original condition. What they might say, is that they will replace the wood that is damaged by termites, that you can actually see.

There are plenty of great termite companies out there and this article was meant just to have fun with most of them. Termite damage can be a serious problem with some homes and I would suggest that you contact at least three termite inspectors, before proceeding ahead with any home repairs or use of chemicals.

Try not to forget, the only way that a termite inspection company will make any money, looking at your house, will be to find something wrong with it.

If you're really interested in basement remodeling and repairs, you should click on this link Easy Home Repair Tips . Get some great home repair advice that can make a big difference on any of your home remodeling projects.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link San Diego Remodeling Contractors

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

How to Protect Foundation Plumbing Pipes?

If you install any underground plumbing pipes, in your concrete building foundation, you will need to protect them, from the concrete. You can use a variety of products and the most common of them will be a Styrofoam wrapping that can be purchased at most plumbing supply stores.

Let's start with the waste pipes, that are made out of plastic. The concrete could actually start to put pressure on the plastic pipes as the concrete starts to expand and this pressure could actually damage your new waste pipes.

You don't need to wrap all of the plastic waste pipes, only the parts of the waste pipes that will be exposed or in direct contact any concrete, but you do need to protect every copper water supply line that will be buried under the ground or exposed to the concrete, with a plastic sleeve. These products can be purchased again at most building supply or plumbing supply stores.

If these pipes aren't protected properly, you could find yourself within a short time, repairing the pipes that are either inside of your concrete foundation or buried underneath your concrete foundation. Either way, this isn't going to be a good thing.

You definitely need to wrap a plastic sleeve around the water supply pipes that are going to be buried or in direct contact with the concrete. This is a must and most building departments will require your plumbing pipes to be wrapped, before it they will sign off on your rough foundation plumbing inspection.

However, for the waste pipes, you can actually use cardboard to protect them. If you're short on funds, why not grab some cardboard boxes, dismantle them and start using cardboard to wrap the pipes, with a little duct tape.

There are plenty of ways to save money in the construction business, buy a few books, read a couple of articles, with a lot of pictures in this can provide you with lots of construction information, from experience building contractors.

Check out some of the best selling Home Building Plumbing Books all on one website

If you're really interested in basement remodeling and repairs, you should click on this link Home Repairs. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks for reading our articles

Wednesday, September 16, 2009

How to Install Ceramic Tile - Proven Steps to Success

You can quickly learn how to install ceramic tile and have stunning success with your project. Sure installing tile is usually left to the pros. But with the right tips, most people can build beautiful surfaces. It's just a matter of getting the right tools and learning how to prepare the surfaces and put the tile in place. Following are the four basic steps for getting tile installed the right way.

Gathering the materials is the first step. Now materials includes getting the few basic tools required for tile installation. There are just a few special tools required. The most important tools you don't already have are the tile cutting tools. That would include tile nippers, maybe a tile cutter board and usually a tile saw. You can rent a saw or start with a very inexpensive saw too.

The other part of gathering materials is deciding on the tile you will use and how much tile you need. That may be the hardest part of the whole project. That's because you have so many tile choices. After you decide how much tile you need, you'll know how much tile adhesive and grout you'll need too. Your tile supplier can help you figure quantities of all the materials. Once you have your materials you're ready to get started with the installing.

An important preparation step is getting the base for the tile solid and clean. A surface that moves will cause cracked tiles. Often the easiest way to get a solid smooth surface is to put down cement board. But that's not necessary since tile can be installed over many different materials. Once you have your materials and your surface preparation done, the actual installation is not very hard.

Laying the first tile is the hardest part. That's because the position of the first tile determines how much cutting of tiles you'll do. It also determines how straight the joint lines will be. Getting the tiles lined up correctly will make for a neat installation. The best way to get the lines straight is to use your chalk line early and often. Actually setting the tiles involves some art. Setting tile is easiest if you gently twist the tiles into position. You don't want to drop the tiles into place or slide the tile into place either. Make sure you have enough mud on the tile so you have a little extra so you can bump the individual piece into place.

Once the tiles are in place, the grouting of the joints goes quickly. Grout does come in several types. Whether you choose sanded or unsanded grout depends on the size of the joint. Another option is using epoxy grout where the tile is in a constantly wet place. After the grout sets briefly, it is easily cleaned to finish the job.

You can learn how to install ceramic tile with the right instruction and some practice. There's no reason why you can't do a professional looking job on your first project. There are quite a few tricks to learn to make it easier to lay tile.

Video tutorials showing how to install ceramic tile can be found at our website.

Al Bullington invites you to visit http://InstallingCeramicTile.net for answers to your tile questions.

Plaster And Drywall Cracks

Bamboo Flooring - One of the Better Going Green Choices

Bamboo flooring is becoming one of the popular choices in hard flooring surfaces today. This is even more true for those homeowners who wish to use "green products" that are easily renewable.

An oak. maple, or pine tree needs to be cut down to get the benefit of lumber products. Another new tree needs to be replanted in it's place, taking many years to reach maturity.

Bamboo, on the other hand, will replenish itself and usually grows to stage that it may be harvested in about three years.

Bamboo flooring-What Does It Offer In Appearance?

When selecting bamboo flooring, the choices in appearance are many. Surprisingly, this product takes on the look of traditional wood flooring and can be found in many finishes.

There are shades as light as a pale bleached look. You will find all of the standard tones as well in light tones, medium tones with reddish overtones, dark tones like walnut, and even an almost black. The choices in appearance are many.

Bamboo, like other hard surface flooring will be beneficial to any in your household who suffer allergies. It will be easier to clean and maintain and keep your household environment more allergen free.

Shopping For Bamboo Flooring

When shopping for bamboo flooring, and especially if you are going to install it yourself, do be sure it is accompanied by manufacturer instructions for the installation process. Do not rely on a sales person. Read and follow the manufacturer instructions and recommendations to the letter. The manufacturer will recommend whatever products, tools, or methods are best used in the installation process to reach the most desirable outcome.

Most bamboo flooring, unlike standard laminates is either installed with glue or fasteners. Use the installation recommended, be sure underlayment is clean and flat, and acclimatize the product properly before beginning installation.

It is advisable to purchase bamboo in either the mid or upper price range. This is true of most flooring products in order to get a better quality that will provide the most in durability and performance.

With proper selection and installation you can enjoy the beauty of your bamboo floor for years and feel that you have made a step toward going green and still get the benefit of a beautiful wood look floor.

Find information on other flooring choices as well as a variety of bathroom remodeling tips and advice at=> http://www.bathroom-remodeling-hints.com

Advantages Framing With Steel

Tuesday, September 15, 2009

Are Home Remodeling Costs Down?

Lately we've been inundated by doom-and-gloom news in the media about the real estate market. But if you're planning to stay in your home and remodel or upgrade a rental for future resale, there is actually some good news to report: it's becoming less expensive to remodel as the market slows down and the law of supply and demand kicks in.

A year or so ago, the market was on fire and building materials and labor were scarce and expensive since the demand for both was equally hot. Construction material was in short supply, if you could find it at all, and finding skilled craftsmen for your project was an exercise in frustration. That situation was made even more difficult by the demand for rebuilding areas of the country that had been hit by Hurricane Katrina. On top of that, delivery costs also rose, due to a spike in gas prices. All of those factors contributed to cost increases of as much as 50 percent in certain areas.

The good news about all that? With the slow-down in the real estate market, materials are more readily available and construction people are actually looking for work to fill their schedules. Gas prices came down briefly, though they've begun to rise again, but the other pressures have lessened, which means that the cost of many common remodeling projects has decreased by 20% or more.

That's especially good news if your project is relatively small. During the height of the real estate boom, many contractors turned down smaller projects or told home owners to wait until they could get to them. However, many contractors are now actively trying to drum up work as the market continues to soften.

The downside of remodeling with an eye toward increasing your property's value is that, at least for the near term, your upgrade probably won't immediately pay for itself like it would have in the last few years. Since real estate prices have declined significantly in many parts of America, your remodeling project won't do much from an investment standpoint as it used to. Recent surveys have suggested that even the most popular upgrades, bathroom and kitchen remodels, are only returning about 80% of their cost.

The bottom line: this may be a good time to schedule that major remodeling project you've been wanting, assuming you're not doing it to quickly turn around and use the upgrade to increase your profits. If you do want to sell for top dollar in a buyer's market, you can increase your profits by turning your home into a buyer's dream home using less expensive faux paint techniques.

Whether you want to remodel or just decorate your home, you can benefit from exploring Flip That House with FAUX. See the controversial home that was on Flip That House at http://flipthathousewithfaux.com/book.html Enjoy your home!

Copyright 2007 Jeanette Fisher

Painting Metal Siding

Frozen Pipes

First, it's important to know which pipes are frozen. If your water will not drain, this means your drain pipes are frozen. If no water comes out of the faucet, this means that your supply line pipes are frozen.

DRAIN PIPES:

What to do: If your sinks, toilets, showers or tubs will not drain, this means that your drain pipes could be frozen. If your drain pipe is frozen, open cabinet doors or cut into your walls or ceilings to allow the heat from your home to get to the pipes. To heat your pipes faster, a hair dryer is a great way to warm them up. Please use the hair dryer with care - if water starts leaking out, the hair dryer can short circuit.

Why it happens: Many times pipes freeze due to finishing off a basement. When the basement was unfinished, the pipes were exposed to the heat of the home. Once the basement is finished, the sheetrock and insulation blocks off the pipes from getting heat from the home. If the pipes freeze, the could cause damage to newly finished basements.

How to prevent it: A simple precaution for preventing frozen drain pipes can be as easy as cutting a 6x9 return air grate in the area to allow warmth into the joyced cavity. Always remember to insulate your pipes from the cold, but not from the heat in the house.

SUPPLY LINE PIPES:

What to do: If your water will not come out of the faucet or shower head, this means that your supply line could be frozen. Your pipes could be burst, so first you must shut your water off at the main. You will want to get heat to your pipes. The best way to heat them is to open cabinets and doors, cut holes in the walls and use fans or hair dryers to warm them up. Again, please use care when working with the hair dryer, if it gets wet, the hair dryer can short circuit. Warming the pipes is important, and the extent of the damage cannot be determined until they are mostly thawed.

Why it happens: Many times pipes freeze due to recently finishing off a basement or a change in insulation. The pipes in your home need to be insulated only from the cold on the outside, but not from the heat on the inside. If your pipes are insulated from the heat inside your home, they have no way of staying warm.

What do do after the pipes are thawed: If after the pipes are thawed, there are non leaks, many times full operation is returned. Sometimes scale and sediment move through the lines because of the glacial-like action of ice, which pushes sediment into blocked pipes. Because of this, ariators and shower heads may need to removed and cleaned for them to work completely.

If a leak develops because of burst pipes from ice, turn the water off again, and call a plumber. It is helpful to know exact location or even cut open walls to identify the exact location of a split pipe.

How to prevent it: If you are worried your supply lines are going to freeze because of past history or evidence to support that, some plumbers may recommend letting run to keep the water flowing - similar to a water tower. Please do not do this! This can be just as dangerous. The water usually cannot go down the pipes fast enough and it can develop layers of ice and plug the pipe, causing an unattended running faucet to overflow the sink. Another way to prevent a freeze is to take care of those leaky faucets. The dripping into the drain can cause an ice buildup and eventually cause a frozen pipe.

Amanda Klecker - Zell Plumbing & Heating

http://www.zellplumbing.com

Fixings Squeaking Stairs

Monday, September 14, 2009

Custom Home Design - Software For the Do-It-Yourselfer!

If a new custom home is in your future, consider doing at least the preliminary designs yourself. Of course you have no doubt already looked at countless home designs in magazines, but none fit your bill - exactly.

With today's technology, computer drawing software has been made extremely user friendly. There are a number of design software options available that the complete novice can quickly manage. And many of these programs are powerful enough for professional designers as well.

Simple and professional. What could be better for your own do-it-yourself custom home design software? Now you can take the best ideas of all of those plans that you have been browsing over and try to incorporate them into your special home.

Many of these software programs offer simple "drag-and-drop" features. This speeds up the design process considerably and allows you more time to do the more important design tasks like bathroom designs and kitchen designs and closet designs.....

Now designers, architects and builders will do this work for - FOR A PRICE. But it may take a few generations of drawings to get to your desired home design. And we all know that time is money!

You will gain a great deal of insight into your home when you design it yourself. You will look at space requirements and flows that you may otherwise disregard if designed by someone else. And some of the small but important spaces - closet, linen storage, laundry, even kitchen cupboard spaces - will get the extra attention that you deem is required.

Having this kind of input into your special new home design will be exciting and self-satisfying as well. Imagine having you friends over raving about a particular design feature and being able to say "That was MY design idea".

Now you will likely still have to engage someone to produce the construction set of drawings, but the design is still YOURS. And you will truly end up with a custom home designed especially for you.

To view a number of home design software options visit our Punch Design Software page. PrefabMetalBuildingKits.com is a website dedicated to metal buildings. Visit us at Metal Building Kits.

Painting A French Door

Sunday, September 13, 2009

Getting Solar Power For Homes - Home Tips

Have you been thinking about getting solar power for your home? Does the idea of powering your home with the rays of the sun interest you? If so, then you'll be glad to know that you many options. No matter what kind of budget you're on, there are affordable solutions that will match your specific needs.

You could always go out and purchase solar panels, but you can save a lot of money if you make your own. Even if your budget is tight, you can still afford all the materials necessary for building solar panels. You can either build from scratch or buy solar panel kits. The kits will have the components needed and all you'll have to do is assemble them. Either way, getting solar power for homes can be very affordable.

While solar power is becoming increasingly popular in rural neighborhoods, those living in urban areas still have options. If you live in an apartment complex in the city, you still may able to place a small solar panel on your roof or patio. You can also ask your electric company if they have any options for customers interested in solar energy. It's becoming more common for cities to offer residents solar generated power through grids. See if that's an option in your area.

No matter where you live, you should consider getting solar power for your home. Not only will you be doing your part in helping the environment, but you'll be saving a lot of money too. While energy sources from the earth are limited and nonrenewable, there will always be a sun. And as long as there's a sun, there will be solar power.

Earth4Energy will teach you everything you need to know about getting solar power for homes. You can learn how to store FREE solar power that you can use anytime you want. Earth4Energy will also help you to understand your options better through informative guides, illustrations, video tutorials, and more.

About the author:

Nadav Snir is a chemistry and physics student who studies energy and ways of convservation. To find out more about energy saving and Earth4Energy, visit his site: http://Great-Info-Products.com/WaterForGas/earth4energy.html

Exterior Wood Beams

Saturday, September 12, 2009

Soundproofing Makes Life A Little Better And Quieter

Air, water and land pollution are not the only pollutions that plague our planet nowadays. One major problem that our world is struggling to overcome at present is noise.

Noise doesnt only destroy your peace of mind, it also degrades performance, reduces efficiency, makes you lose your sleep thus affecting your health and sometimes, it even causes accidents. A noisy home creates chaos among family members just as noise in the office breaks down production and causes workers to misunderstand each other.

Because of noise, gap is created and the order of things is disturbed. Noise is truly detrimental not only psychologically and emotionally but almost in all aspects of every individual. This is why when it comes to noise, you have to shield yourself and your home.

Soundproofing Tips To Help Restore Peace And Quiet To Your Home

To effectively achieve soundproofing, you first have to understand the principle behind noise. Sound is actually produced from the reverberation of air; hence, in order to do soundproofing, you have to deaden the air or stop it from moving. If its not possible to do this, at least reduce the speed of air so as to moderate noise as well.

Using sound barrier is the most frequent solution for soundproofing any room or space. Those materials that block off or oppose noise are called sound barriers and they are mostly made from nonporous materials; thats why most of them are sturdy and solidly strong. Examples of sound barriers include acoustic panels, drywall, plaster board, wood and concrete.

Noise can also be eliminated or dampened through passive absorption. This method is the exact opposite of blocking sound using sound barriers. Here, sound wave passes through an absorbent material such as acoustical foam or mat and is forced to change direction multiple times or dissipate. The diffusion of noise reduces its energy or intensity thus when the sound reaches your ears after passing through an absorber, it wouldve been considerably regulated and usually accompanied by a transformation into heat energy.
Whether you live in a big house or dwells in a modest apartment in the city, the sound of peace and quiet is almost a luxury amidst the multitude of noise that beleaguers you. Soundproofing your home will get rid of all the noises that disturb you, not to mention that it will also please your neighbor with an ear-piercing squeal.

Aside from surrounding and sticking all types of soundproofing materials on the walls, ceilings, floor, windows and doors of your home, you can also soundproof your home in other simple yet innovative ways. For instance, having some trees or big plants in your front yard could dampen down noises that come from the road. Another small thing that you can do to minimize noise at home is by installing rubber pads on the edges of your doors. This will stop all that slamming sound and banging of doors which startle you out of your wits. You can also check your houses for inconspicuous airspaces and crevices where noise may enter your home. Seal these fissures with liquid type sealant to ward off noise from crossing the threshold of your home. If youre into art or imaginative enough to try off other atypical things, then you may set up fountains or put in a large aquarium into your living room to replace the noise with soothing sounds of gushing water.

Soundproofing doesnt need to be that complex and costly. With your own innovations and unique ideas, you can find ways to keep peace and quiet to your home.

Robert Banks is the owner of http://www.soundproofing-info.com Know the different soundproofing methods and solutions by checking http://www.soundproofing-info.com

Painting Metal Siding

Understanding Wood Shrinkage in Finish Carpentry

These days trim wood shrinkage in finish carpentry does cause some problems and has tested the reputation of even the most seasoned finish carpenters. This can be controlled some what if it is properly addressed however the shear speed at which houses get built and the use of new growth lumber these days poses a lot of the problems that are unfortunately some times unavoidable.

Trim wood should be acclimated to the inside environment of the house where it will be installed. This does also apply to the wood of a new wood floor to be installed. What this means exactly is the wood needs time to adjust to the temperature and humidity levels of the house where it will be installed. This in turn reduces the shrinkage of the wood and that helps to keep miters tight and doors working properly. There is much discussion on how long this acclimation period should be and a few variables do come into play here especially with a newly built home. A very minimum of an acclimation period would be 48 hrs. if the environment change of the storage place of the trim wood or the store to the house environment is not a huge difference. Another factor is after the acclimation period it is best to get the wood finished and sealed whether you do it before or after installation.

Ultimately wood is going to shrink and swell according to the seasons. Some places more than others due to the climate differences. The best way to reduce this is to try and keep the environment in the house relatively even with just the temperature although I have seen a new house with new trim work sitting empty with no activity like cooking or showering for a long period of time have major shrinkage in the trim wood due to no humidity. I had trimmed this house and was just sick when I went back for the final; fortunately the builder that I had done the work for understood this problem and took full responsibility. I had been in the finish carpentry business for a long time and had a good reputation of doing good work but some times that reputation doesn't mean anything to the people that don't understand these problems.

For the do it yourselfers doing trim work, there are a few things to consider. If you are remodeling or doing renovations to an existing home just simply taking the precautionary measure of acclimating the wood will eliminate the major shrinkage problem in most cases. On new homes it is however nice to know the humidity levels in the house as well as the wood. One easy way to check the wood is with a moisture meter tester. This little meter is relatively cheap or can be borrowed from a contractor that does building or remodeling. The use of a dehumidifier is recommended in a new house or new construction and doing a little research for the moisture content that is recommended for the area that you live in is also advisable. This is due to the different climates in the country and various temperature changes for the different areas. As a finish carpenter it is important for people to understand some of these issues concerned with wood shrinkage whether you are doing the work yourself or hiring a professional to do the work for you ultimately to protect yourself.

Pat Fisher is a professional carpenter and woodworking craftsman. For more information on finish carpentry and household carpentry projects, visit http://www.finishcarpentryhelp.com and pick up your free eBook.

Installing Windows At A Eye Leve

Friday, September 11, 2009

Home Improvement Tips - Types of Countertops

It used to be that laminate was pretty much your only choice for kitchen countertops. Those days are thankfully long gone but now a homeowner is faced with a variety of choices and wide range of prices available for your kitchen renovation.

Some of the popular choices include:

Ceramic Tile

This remains as a popular and economical alternative that is heat and scratch resistant. It is high maintenance though since it needs to have it's grout sealed regularly to avoid staining.

Concrete

This is a incredibly versatile surface that can be textured and detailed with patterns unlike any other surface. However it is extremely porous and needs to be regularly sealed to avoid stains.

Engineered Stone

This product is made of a quartz composite with colored pebbles or different materials giving its wide range of colors. Texture is usually even and the colors can be reproduced over larger areas. It as extremely durable product that can resist heat and stain.

Granite

Granite is a natural stone. It comes from different regions of the world and can vary widely in color and pattern. It needs to be seamed and requires period sealing to avoid stains. It cannot tolerate high heat from hot pans.

Laminate

Laminate comes in a variety of colors but is not designed to be long lasting. Although it is somewhat stain resistant it will scratch easily. It will also burn easily from hot pans.

Marble

This is another natural stone that is porous and stains easily. It must be sealed every two to five years. They are also easily scratched and cannot take high heat from hot pans.

Slate

This is a third natural stone that is less porous and doesn't require sealing but can be easily scratched

Stainless Steel

This is a very popular product because of the sleek modern look it conveys. It is very durable and resists staining. Often times the surface is brushed to hide any scratches.

Wood

Various types of hardwoods can be used for countertops. It does require regular sealing to avoid drying out and is susceptible to burns from hot pans.

These are some of the pros and cons of the more popular types of countertops. Choose your countertop carefully depending on your usage and needs.

Bob Current writes on a variety of subjects including home improvement tips. You can get a free copy of his report about Choosing The Best Contractor for your project at http://www.homeimprovementtips.info and at http://www.concretecountertops.bcurrent.info/concretecountertops

Painting A French Door

Thursday, September 10, 2009

Discount Bathroom Vanities to Upgrade Your Older Home

With housing prices being as low as they are, it's a great time to buy a home, but not to sell one. If you are living in an older home, there are ways to make it feel like new again, so that you can keep on enjoying your home without moving to an upgraded house. Here are a few ideas for you that will make your home nicer but not cost you a small fortune.

The two most popular rooms for remodeling are the kitchen and bathroom, and rightfully so because we all spend a lot of time in these rooms. If you would like to upgrade your kitchen, there are a few things you can do that don't cost a lot but will make a big impact. Why not try adding a kitchen island or butcher block to your culinary area? You will love the extra counter space and food preparation area, which can also double as a handy snack table if you add a couple counter stools to it. Kitchen islands are a great way to upgrade your kitchen without spending a lot of money, and you can get a tile or stone countertop that matches what you currently have on your other fixtures, or you can go for a natural butcher block top that matches any dcor. Another way to spruce up your kitchen without spending a lot is to replace your old kitchen faucet with a newer one, perhaps one that does more than your old faucet head.

Now to tackle that old bathroom! You may have the bathroom that time forgot, or maybe you just don't like what was installed, but the quickest way to change the whole appearance of your bathroom is to get a new bathroom vanity. The vanity is the centerpiece of your bathroom, and if you don't like the current one or it's a looking a little run down, then it can bring the whole bathroom down. If you shop for discount bathroom vanities then you can save money and give yourself a whole new space. You can shop the sales at local home improvement stores, or you can shop online, which is where the best deals are really found. Make sure to measure your space accurately, so that you can find just the right size vanity for your needs, and not find yourself with a vanity that's too big or too small for your bathroom.

No matter what you decide works when upgrading your older home, we hope that you will find these tips helpful and love your old home like it's new again.

If you would like more information on the variety of discount bathroom vanities available or where to find a great price on a bathroom vanity, please visit the Premiere Vanities website.

Plaster And Drywall Cracks

Tuesday, September 8, 2009

The Importance of Remodeling

In real estate, first impressions truly are everything. In fact buyers can usually tell within the first few seconds of viewing a home whether or not it's the right choice. Call it intuition or a simple matter of taste but at the end of the day sellers must make sure the home exterior grabs attention.

The National Association of Realtors reports that sellers have the best return on investment with exterior remodeling projects which is a no brainer considering it's the first thing prospective clients see. These remodeling projects can encompass a number of things from vinyl sliding to wood decks.

Keeping in mind that since the exterior is what most people see, that's where sellers should put the majority of their funds. This is not to say that interiors should be overlooked as interior remodeling also has its sizable return on investment but in this case one must take into account the whole first impressions idea.

Remodeling does not necessarily have to involve (or be limited to) the actual home exterior as the landscaping can also have a dramatic effect in catching a buyer's attention from the outside. After all, a colorful and well maintained yard does give off an impression that the home is in good condition.

During these tough times when buyers are scarce, the more effort that's put into making a good first impression, the better the chances of finding a buyer. Always make sure that whatever funds are used towards any home remodeling are not funds which affect money used for an emergency or for long term savings.

For more information please visit http://www.southbeachboutiquerealty.com

Monday, September 7, 2009

Are Social Energy Tariffs the Solution to Fuel Poverty?

Social energy tariffs explained
So what exactly is a social energy tariff? It's generally a term for a special rate offered to vulnerable people who have difficulty paying for the gas and electricity that they need.

The eligibility criteria for social tariffs vary between utility providers. Most gas and electricity suppliers make their social tariffs available to the elderly, those on benefits or low incomes, and the 'fuel poor'. Fuel poverty is when at least 10% of your income is spent on gas and electricity. So if you think that you may qualify, it's worth contacting your current energy supplier to find out for certain.

Social energy tariffs available from UK Energy Suppliers

* British Gas has a Winter Warmer scheme for people in receipt of disability or attendance allowance, or pension credit. This provides payments of up to 30 each for gas and electricity during winter. The company will also offer its lowest standard gas and electricity tariffs to vulnerable customers.

* E.On offers a Stay Warm tariff which fixes gas and electricity at a low rate for a year. To qualify, you must be over 60, living in a house with a maximum of three bedrooms, and paying for both gas and electricity by direct debit.

* EDF Energy provides a 15% discount on current standard tariff prices to the fuel poor or people who qualify for income support or pension credit.

* Npower's Spreading Warmth social energy tariff will deliver a discount of 250 per annum to dual fuel customers who are most in need (125 for single fuel users).

* Scottish and Southern Power gives discounts to the fuel poor, those on benefits and people with special needs via its Energy Plus tariff. It estimates that this will be equivalent to a 30% reduction in bills for a family in a three-bed semi.

* ScottishPower suggests that eligible customers on its Priority Services Register (for pensioners and those with certain disabilities) apply for their Carefree Plus tariff, which offers discounts of up to 122 per annum.

In addition to the 'Big 6' energy providers, Atlantic Electric & Gas, Countrywide, EBICo, Ecotricity, Good Energy, Green Energy, Sainsbury's Energy, Scottish Hydro Electric, Southern Electric, Spark Energy, Swalec, Telecom Plus, Union Energy and Utilita also have their own Social Tariffs.

The future of social energy tariffs
Industry regulator Ofgem has published new guidelines on social energy tariffs. Previously, social tariffs were only required to be as cheap as the direct-debit tariffs provided by the energy supplier. However, this meant that the most vulnerable customers were often paying more than people on low-rate internet deals. The social energy tariffs are now required to be at least equal to the utility company's cheapest deal, which includes online-only tariffs.

There is also a possibility that social tariffs will be defined by law. At the moment, the definition of a social tariff is decided individually by each gas and electricity supplier. This means that trying to work out which energy company provides the best deal is difficult, as eligibility criteria and costs vary. The government may enforce minimum standards in the future.

The Winter Fuel Payment
People aged 60 or over may get a Winter Fuel Payment to help them keep warm in winter. This tax-free annual benefit is normally paid from November, with most payments made by Christmas. Qualifying households will receive between 250 and 400 towards their winter fuel bills, and the money will be paid in the same way as their pension.

Other ways to lower utilities bills
If you aren't eligible for a social tariff, or if you are looking for another way of saving money on your utility bills, it's also a good idea to see if switching energy provider will reduce your gas and electricity costs.

We've all been affected by gas and electricity price rises, but if you're having serious problems with paying your utility bills, there is plenty of help available if you know where to look. Don't suffer the cold in silence; make sure that your energy supplier is giving you the assistance you need to heat and light your home.

To compare Energy Prices check out http://www.confused.com/gas-electricity

Right Door Closers For Your Doors

At our present time, our world has developed technologies to make us live comfortably and easier. We have been innovative and creative to keep up with the fast pace of our world. Everything we do demands us to be time efficient. And doors are not an exemption to that innovation.

If you are tired of opening and closing up your doors and you feel like wasting a few of your time just because of opening and closing it. Now there are close doors, we can just open our doors and it can automatically close. Through that, we do not have to be anxious if ever we have left our door open because it is the function of the door closers to mechanically close it.

It comes in various styles that will perfectly fit to your doors. Take also into consideration the amount of traffic that the door closers will control in that certain area for there are specific type door closer that can manage the amount of traffic of your door. So, before putting it up you must first calculate the quantity of traffic that the door closer will manage so that you can install the right door closer for your door.

There are those that are designed to tolerate a severe traffic jam; it is well-matched for main entrances of business offices, hotels, firms and the like. It has the competence to be used 300-400 times daily. There are also these types of closers that are for average traffic that can be used for 50-100 times daily. Make sure to use the well-suited door closers for your door for you to handily open and close the door. For outside doors, a backheck is considered necessary it is a third valve or control that is added to it so that the opening and closing of the door is not too quick.

It is in two styles, overhead and jambed mounted. These overhead door closers can be hidden or surface mounted while the jambed mounted style will fit between the door and doorframe and are completely unseen when the door is closed.

Because today people are so dependent with the internet, you can search for door closers online for you to easily purchase it at your own computer in your convenient time. The prices are within your means with the guarantee that it is made only of robust materials that can allow you to make of use it for many more years. It is useful these days for everything today should be speedy and time efficient. This is convenient not just at homes but as well as to business firms and companies because this can surely grant expediency to their clients and costumers.

Matthew Stanton writes an article about Door Closers which provides incoming and outgoing visitors of a particular building to close doors for them automatically. Simply visit this website at http://www.wholesalelocks.com/door-closers.html

Remodeling Your Home Tips

You know....been there done that. That's me. I've been fortunate to have been able to live in every house I've remodeled, call me crazy. I've seen first hand the mistakes and regrets you'll have so here are seven must do's!

Hire an architect: Perhaps the best money you'll spend out of your whole budget. Computer-aided software will create every detail on your plans which turns into huge labor savings on the job site, and less headache. It will also allow you to simplify the construction plan as a whole to shorten construction time.

Hire a contractor: Unless you've done this before, or you're in the trade, never attempt this on your own. Books and advice from friends will not prepare you emotionally for the challenge. Working with a plethora of subcontractors, bankers, appraisers, inspectors, and labors will most certainly overwhelm most people. Of course, always do your homework on your contractor, most importantly a license, insurance, and bond. But just as important are references, or referrals. Always ask for pictures, and/or tours of their previous projects.

Have and open mind: Be willing to accept changes in the plans due to unforeseen circumstances. An architect can have a perfect set of plans, but once their put into action on the job site, things always change (usually once the plumbers and HVAC come in).

Don't shortcut yourself: Get the house you want now! Moving a wall here or there, adding a deck here, or moving the sink over there, might seem like major changes, but they're not. And contractors might complain, but it's your money, and it's better to do it now while your subs are already on the job site. Don't short yourself on materials either. Pay now or pay later.

Take pictures: And not just once a week. Have a plan to go every day in the evening when the workers are gone, and take lots of pictures from every angle. This is especially important when mechanicals are in. This comes in very handily when you need to hang that picture on the wall where the electrical service enters the house. Pictures will also come in very handy at inspection time. Having these at the ready for your inspections will most certainly ease tensions.

Hold your Contractor Accountable: They don't get their final draw until your 100 percent satisfied, and all problems have been dealt with. A good contractor won't beg you for money if they're reputable. A busy contractor is a good contractor, and probably won't need your money right away anyway.

Detail your experience: Remodeling is emotionally challenging, but very rewarding, especially if you DIY. Keep a diary of this experience, and add your pictures along the way. Job sites are always good places to get quotables (not always suitable for children). Make a scrapbook page and display it for all to see and remember. Enjoy!

Hear My 2 Cents on a variety of topics, and product reviews at http://www.my2cents-chris.blogspot.com Be sure to browse my links to informative information and family blogs. Thank you for viewing my articles. I pride myself on providing informative and tell it like it is information.

Harness the Power of the Sun

We have recently seen shock rises in oil prices and corresponding rises in gas and electricity. While oil prices have thankfully declined, we have yet to see the cost of our utilities decline to their former levels. Many people are considering the real possibility of a massive energy shortage in the coming decades. With this in mind, more and more companies and households are seeking out alternative sources. The ideal alternative is an energy source that is less demanding on the Earth's natural resources, more economical for the company or individual and finally a source that is kinder the global environment.

The answer to many people is not to deplete the world around us but to harness it and utilize the Earth's natural power without causing lasting damage that will be felt by our children. The number one area that people are investigating is the so-called 'renewable' energy sources. This concept refers to sources that provide energy from natural resources that are, unlike oil or coal, naturally replenished. Sources such as wind and tidal power have long been candidates for the main provider of energy in the future. However, there is one source that has been providing energy for our planet since life itself began, the sun.

Harnessing the power of the sunlight, or so called solar power, is not a new concept but as today's technologies increase in sophistication, new means and methods of bringing the energy provided by the sun to the everyday consumer are turning heads in the scientific world. The beauty of solar power is that households and businesses can eliminate the need for reliance on vast power stations and turn to solar panels to provide a self contained solution to energy needs. In fact, many architects are now beginning to incorporate solar power solutions into their original plans for buildings. By designing buildings and structures with both energy conservation and generation in mind, the final goal is to create what is called a 'Zero Energy Building'. This, despite the jargon, literally means a building that has an energy consumption of zero. This would effectively eliminate that building's requirement to be attached to some national energy provision service and reducing the overall burden on natural resources.

One of the major benefits of solar power over other renewable sources is the fact that the sun is a globally obtainable source of power that is not as expensive as demanding as sources like tidal or wind power. With advances in technology, using solar energy for heating and electricity generation has become a realistic and affordable solution for home owners.

To read more about using solar power at home, please visit Home Solar Power at http://4solarpower.net

Consider Basement Renovation to Increase Value to Your Home

You can increase the value of your home with a good basement renovation. When you consider renovating your basement you need to determine why you want to renovate it. Maybe you want to make a basement room into a work out center, convert it to a television room, and make it into a kid's playroom or any of a number of other things.

Your project may be as simple as a new coat of paint on the dull walls or as extensive as a complete makeover into a new room. In any case there are some basic things you will need to consider and think about before you begin.

You will need to decide if the renovation to your basement will be easy enough for you to do yourself or if it will require the services of a professional basement contractor. Either way, you will have to prepare a budget.

One aspect in basement renovation that is extremely important is evaluating the quality of the air flow in the existing basement area you want to renovate. If your basement is moist, it will be prone to mildew. You will need to focus on getting the basement dry so it will be a place that you to go instead of a smelly place you avoid.

If your primary goal is to make your home a more comfortable place with the addition of quality space or improving the existing space, you need to consider basement renovation to accomplish this goal and add value to your home.

Considering basement renovation? Discover practical basement remodeling ideas online and turn cheap basement ideas into dream basements at a budget.

Solar Power - Confessions of a Personal User

Home solar is often considered and regarded as an appropriate solution to your ongoing power crisis. Home solar is effective in terms of not only saving your environment by making use of non-polluting means, home solar is also feasible as it is affordable in nature. Taking cue from the above statement, let us now discuss the main reasons why we need to use sun's energy to good use. Here are the true confessions of a user.

It Was Easy To Install

Th very first advantage of using solar power, as was found out by a new user, is the ease of convenience. You can have a set-up kit delivered to your doorstep and this in turn can be had through the means of the internet. Thereafter, you can either assemble or dismantle the kit in a matter of minutes-it is that simple.

It Saved A Lot Of Money

The second biggest advantage of using the sun powered panel, as told by the new user, was the savings in terms of electric consumption. In a relatively short span of time, the individual was able to harness more power than his house could possibly consume. The surplus generation was then appreciated by the government, for which the user was given a cash back.

It Was Affordable

Contrary to the popular belief, the consumer had procured a solar panel which was virtually inexpensive in nature. Not only did he save on money, he never even had to spend a lot of time in getting it home. This was so as the product was automatically delivered to his doorstep.

Hi, I am Mark Morris and I am an energy conservationist. I have a secret to share.

The Recommendation: To adopt a widely approved Solar Energy Program, which allows you to permanently get rid of your recurring electric bills. It has helped COUNTLESS people worldwide-it is now your turn.

Who Is It For: Folks who are tired of polluting power programs and have lost thousands of dollars on wasted power bills. It is for any and everyone who wishes to see instant results and save money.

How To Get There: Simply click http://purelyfitness.com/earth4energy-review and join the successful campaign to save our environment from further pollution.

Sunday, September 6, 2009

Folding Shutters - Find Out the Truth About Them

Folding Shutters are one option among the many different choices you can make to protect your home from hurricanes. They are similar to roll-down models in that they can be rolled out by the sides to cover the shutters. They can be an effective choice for home protection. Here, we take a look at some the specifics about them:

1. Offer a good compromise of protection and aesthetics.

Folding Shutters offer a durable amount of hurricane and debris protection. Although they are not perhaps as good against hurricane damages as storm panels, they do offer an upgrade in aesthetics. They can often neatly be moved to the sides of the windows or doorways after the storm allowing you to keep them up year round. They tend to be very discreet as well depending on the model chosen which helps keep them from detracting from the beauty of your home.

2. Easy to install although can have maintenance issues.

The good news about theses types are that once they are installed, you are ready to go. Since you do not take them down, your work is only to open and close them when you need them. This process is much easier compared to storm panels or using plywood. However, over time, some models can have difficulty with the rolling system requiring some maintenance work. For this reason, some consideration should be given to how willing you are to put up with some maintenance work every few years.

3. Moderately priced for their value and benefits.

These are priced within the middle of the range of storm panels on one end and impact windows on the other. This makes them an attractive alternative for those who want improved beauty and convenience, but are unwilling to buy more expensive models.

Folding Shutters offer a number of advantages to homeowners concerned about hurricane protection. Although they are not the most sought after of the options, they certainly can be helpful to many families who are looking for a good compromise of options.

For more information on the Storm Shutters. Also, try visiting http://www.storm-shutters.net to get some solid tips on different hurricane shutters and impact windows.

Shower Stall Curtains

Most people prefer to relax in bathtubs. However, some people have other equipment that allows them to have a quick bath. The equipment is built in the bathroom to prevent the seeping out of water as you bathe. The equipment is available in different colors and designs. Besides, there are different sizes and prices to suit you.

Some types are door less and they make the bathroom look different and neat. The equipment can be beautified using shower stall curtains. These curtains are a cheap way of providing a refreshing relaxing environment. The curtains make the place appear elegant and stylish. They are available in different colors and patterns. You should choose according to your taste.

Shower stall curtains are available in various materials. Most are made from vinyl. The curtains can be customized to suit your needs. You simply need to consult the concerned company. For the door less type, the curtains must very long. This is to prevent water from splashing onto the toilet and messing up the floor. It prevents accidents that can occur when water is on the floor.

To obtain shower stall curtains, visit the household department of a nearby mall. You can also order from the Internet. Different companies showcase their designs from which you can choose from. You can easily compare prices and choose your that suits your pocket. If however you are not satisfied with what the companies offer, make your own curtains. You can get ideas from various web sites on how to make the curtains.

Peter Gitundu Researches and Reports on Shower Curtain. For More Information on Shower Stall Curtains, Visit His Site at SHOWER STALL CURTAINS

You Can Also Add Your Views About Shower Stall Curtains At My Blog here SHOWER STALL CURTAINS

Energy Trends For the Future

When it comes to energy efficiency, money is definitely the name of the game. This factor is what makes energy efficiency and maintenance efforts pay off. Information about costs is an important part of reporting accomplishments to other people. When you are able to track costs, it reveals pricing trends and helps with cost projections necessary to prepare budgets.

These current and projected future prices of energy are then used as the basis for determining whether potential energy efficiency policies will be cost effective. To give everyone in your organization a complete picture of the need for energy investment, any dollar savings figures you use should include actual costs, as well as avoided ones. You will also want to give management some information about what the dollars saved could be used for, such as buying or updating equipment, adding more services, etc.

Benefits to the Environment

Better energy efficiency is a cost-effective way to lower emission rates generated from burning fossil fuels. This added benefit should be very clearly pointed out in your energy management program. You may determine that it is worthwhile for your organization to track the lower level of emissions achieved when energy conservation practices are improved. When management is supportive of using energy resources more efficiently, they are probably very environmentally conscious. Your efforts to increase energy efficiency will likely gain even more support if they can be documented and shared with others in your organization (and possibly the public).

Standard procedures for calculating lowered emissions levels for specific fuels are becoming more available. Contact the Environmental Protection Agency, your state energy or environmental office, or your utility to learn more about making these types of calculations.

Matthew Shields

Energy Expert

How to Install Laminate Floors

Laminate flooring is more than just an affordable way to have a great looking floor. It is also extremely easy to install, making it one of the most popular types of flooring in the United States. People are drawn to this inexpensive design because nearly everyone cannot tell the difference between laminate flooring and authentic wood. This is because it appears to resemble natural wood and it comes in hundreds of different patterns, such as stone and marble. Nonetheless, laminate flooring proves to be a great alternative for someone who cannot afford anything else.

According to Websters, laminate flooring is simply a hard surface covering utilizing a fiberboard core and melamine wear layer, which is available in blocks, planks, and squares. Although this definition makes the flooring sound tricky and bewildering, it is actually quite painless to install. It is a great do it yourself project for anyone who has the motivation and the time to do it.

The first thing you need to do is find out how to prepare your floor before purchasing the laminate flooring. Most businesses will tell you to make sure there is no dirt or dust present on your old surface. It is also wise to make sure the floor is level and there are no slants anywhere near where you are placing the pieces. This could make things very difficult when trying to install the laminate.

There are many different types of installation available. Therefore, after getting your old surface ready, you should ask yourself how much experience you have had with installing floors. If you know absolutely nothing, you should use the snap technique. This means that the laminate pieces are actually linked together and are easily snapped into place. However, this process may end up being more expensive. For that reason, it is smart to price everything before you pick an option. Another great way for beginners is to buy the pieces that already come with glue. All you have to do is just add water to the back of the pieces and place them wherever you would like. Most people go for this option, since it is the easiest and less expensive. Luckily, there are exceptionally simple ways to create great flooring.

No matter what you have as a floor covering, laminate flooring can be put over it. From concrete to wood, laminate is easily placed on top. The only thing to remember is that laminate cannot be placed over carpet. It is also great to remember that laminate flooring requires no hammers or nails. The only tool you need is glue, unless you buy the pieces that already come with it.

Another crucial step is to check your laminate flooring. Sometimes companies will accidentally send damaged or ghastly products. By carefully checking the entire laminate piece, you will be able to make sure that everything is accurate. If you have begun installation without noticing a flaw, chances are you wont be able to return it. Therefore, it is extremely important to check everything before you start.

Regardless of how experienced you are with installations, laminate flooring is piece of cake to put in your home. It is not only an inexpensive way to make your home look stunning, but it also will give you an abundance of pleasure for years to come.

Natalie Aranda writes on home and family. Laminate flooring is more than just an affordable way to have a great looking floor. It is also extremely easy to install, making it one of the most popular types of flooring in the United States. People are drawn to this inexpensive design because nearly everyone cannot tell the difference between laminate flooring and solid wood flooring. There are many different types of installation available. Therefore, after getting your old surface ready, you should ask yourself how much experience you have had with installing floors.

Portable Solar Panel Kit - It is Finally Affordable!

If you are seeking for a quick and easy way that'll cut down your expensive electricity-bills, no doubt that Portable Solar Panel Kit can help you get there. Quite amazingly, this technique can successfully operate almost any home-appliance. Need more information? start reading this article and learn more about how this technology can help you to significantly cut your expenses.

Short background

The idea is quite simple yet a clever one - Portable Solar Panel Kit is based on a downloadable instructional guide that explains in simple words how to assemble Solar-Cells at ridiculous cost. It may sound obvious, but be sure to choose the right guide; make sure it provides 'proofs' to be working for others. This way or another, here are few key-benefits and & quick advices that may help you to know more about this subject.

Main advantages

This innovative solution provides several important benefits:

- Enables us to make a 220V-240V elec. sys.

- Knowing that we are doing our part to conserve the planet.

- Requires no more than a weekend to be installed.

- Made of simple parts/tools found at any local hardware store.

- Helps on reducing the amounts of carbon dioxide in the air.

Quick tip

If you live abroad make sure that your guidebook enables you to build a 220V-240V unit.

Bottom line

There is no question - Portable Solar Panel Kit truly provides an outstanding opportunity for any household to 'cut' their elec. expenses to almost zero. It would be quite easy to find other great benefits provided by this one-of-a-kind invention, simply because it brings a real change to this industry. It is highly recommended to evaluate it so you could truly see how it can save your monthly budget.

Learn how Portable Solar Panel Kit easily enables you to produce free and unlimited electricity in just few days.

Visit: http://www.EasyFreeEnergy.com

Soundproofing Makes Life A Little Better And Quieter

Air, water and land pollution are not the only pollutions that plague our planet nowadays. One major problem that our world is struggling to overcome at present is noise.

Noise doesnt only destroy your peace of mind, it also degrades performance, reduces efficiency, makes you lose your sleep thus affecting your health and sometimes, it even causes accidents. A noisy home creates chaos among family members just as noise in the office breaks down production and causes workers to misunderstand each other.

Because of noise, gap is created and the order of things is disturbed. Noise is truly detrimental not only psychologically and emotionally but almost in all aspects of every individual. This is why when it comes to noise, you have to shield yourself and your home.

Soundproofing Tips To Help Restore Peace And Quiet To Your Home

To effectively achieve soundproofing, you first have to understand the principle behind noise. Sound is actually produced from the reverberation of air; hence, in order to do soundproofing, you have to deaden the air or stop it from moving. If its not possible to do this, at least reduce the speed of air so as to moderate noise as well.

Using sound barrier is the most frequent solution for soundproofing any room or space. Those materials that block off or oppose noise are called sound barriers and they are mostly made from nonporous materials; thats why most of them are sturdy and solidly strong. Examples of sound barriers include acoustic panels, drywall, plaster board, wood and concrete.

Noise can also be eliminated or dampened through passive absorption. This method is the exact opposite of blocking sound using sound barriers. Here, sound wave passes through an absorbent material such as acoustical foam or mat and is forced to change direction multiple times or dissipate. The diffusion of noise reduces its energy or intensity thus when the sound reaches your ears after passing through an absorber, it wouldve been considerably regulated and usually accompanied by a transformation into heat energy.
Whether you live in a big house or dwells in a modest apartment in the city, the sound of peace and quiet is almost a luxury amidst the multitude of noise that beleaguers you. Soundproofing your home will get rid of all the noises that disturb you, not to mention that it will also please your neighbor with an ear-piercing squeal.

Aside from surrounding and sticking all types of soundproofing materials on the walls, ceilings, floor, windows and doors of your home, you can also soundproof your home in other simple yet innovative ways. For instance, having some trees or big plants in your front yard could dampen down noises that come from the road. Another small thing that you can do to minimize noise at home is by installing rubber pads on the edges of your doors. This will stop all that slamming sound and banging of doors which startle you out of your wits. You can also check your houses for inconspicuous airspaces and crevices where noise may enter your home. Seal these fissures with liquid type sealant to ward off noise from crossing the threshold of your home. If youre into art or imaginative enough to try off other atypical things, then you may set up fountains or put in a large aquarium into your living room to replace the noise with soothing sounds of gushing water.

Soundproofing doesnt need to be that complex and costly. With your own innovations and unique ideas, you can find ways to keep peace and quiet to your home.

Robert Banks is the owner of http://www.soundproofing-info.com Know the different soundproofing methods and solutions by checking http://www.soundproofing-info.com

Saturday, September 5, 2009

Things to Consider Before the Installation of an Electric Shower

Everyone wants to have an attractive and luxurious shower in their bathroom. Electric showers have better impressions among other types of showers and are widely used because of their excellent performance. Compared to other showers, electric showers are easy to install, economical, and convenient to use. Basic requirements when installing electric showers include little plumbing from the cold water supply and appropriate electrical connection. However, few precautionary measures should be taken in order to provide a safe and economical output.

For households with only cold water pipe line available, electric shower is the only option. It is also recommended for areas with low pressure water supply. Electric showers have built-in pumps designed to maintain water pressure for the shower and sprayed through the shower head.

On the other hand, for households with both hot and cold water pipe lines, mixer showers are suitable and the best option. It is designed to mix hot and cold water to regulate the water temperature when used. Lastly, on areas provided with low pressure water supply, but with installed heater for a shower, power showers are the best option.

During installation, the shower head should be installed in an area far from the base tray to avoid contact. Installation of electric shower should also be in accordance with the water supply that should have a minimum running pressure of 1.0 bar at a flow rate of 8 liters/minute. Water supplied to electric showers should be cold and must have a dedicated line to be used exclusive for the shower to maintain water temperature.

Showers should not be installed in sections with freezing conditions, but should be placed on tiled surfaces. Before completing the water supply connection with electric shower, pipes should be cleaned and checked so that waste can be washed out and avoid obstructions for the water to flow. One isolated valve must also be fitted in the main water supply. This valve will regulate the opening and closing of the main water supply which is necessary when performing maintenance of the shower.

For electric showers, compatible cable that can carry proper voltage to the device should be chosen. A separate electric connection should be used from the unit to the shower through a double pole switch. The switch will be used to turn the heating process of water on and off. It is also suitable for turning electricity off in emergency situations. This should be installed in a secured place, away from any person taking shower to prevent any accidents brought by electrical shock. For added safety, wirings of electric shower must be connected to a switch without any plug or socket.

Making the required electrical connection for the shower may sound simple, but professional electricians are required to perform the task. All these precautions should be considered before installing electric showers. By considering these things, installing electric showers is made easy and safe. Let us all remember that one can only get the most out of it when it is installed properly and effectively.

If you are looking for more information then feel free to visit electric showers and electric power showers.

Generate Your Own Power Now - Go Off Grid With Wind and Solar Power!

Wind power and solar power are becoming increasingly important in today's world of high energy prices, global warming and environmental awareness. More and more homes and offices have solar panels on their roofs, and the huge rotating fins of wind farms are becoming more and more familiar across our landscape. The problem is that even with alternative energy, it's the major players who are set to benefit most - you, the home owner, still has to pay for his or her electricity, no matter how it's produced. So why don't you have solar or wind power in your home yet? Is it because you think its too expensive?

In fact, you can have your own solar or wind powered system setup in your own home for less than $200! This may surprise you, but the reality is that most of the components required to build a solar energy or wind energy system are basic and readily available. For example, wind generators don't use any complex high-tech components. Think about the alternator in your car - it generates electricity all day long just by being turned by your car engine, and then stores it in a battery. That's exactly what a wind turbine does - it's the same principle. A solar system can be made just as simply.

Although the technology and components are relatively simple and affordable, what you do need is the know-how. It's easy to build a bad wind or solar generator - what's not so easy is to build a good, efficient and reliable one. This will generate the maximum amount of electricity from the available wind or sunlight, and store it efficiently. You also need to know exactly how to harness this power, and feed it into your home power supply. Done correctly, it's possible to run all your household appliances from your own energy - think about the savings you could achieve!

If you're interested in DIY Wind Power or Solar Energy, then you need a comprehensive instruction manual. Find out how to build your own wind turbine or solar power generator for less that $200 here - Home Wind and Solar Power

Alternative Home Energy